This article covers the Emkarate RL grades from ISO VG 32 through ISO VG 220, plus RL170H, a 170 cSt grade that sits between ISO VG 150 and ISO VG 220. RL32-3MAF is a separate 32 cSt route with a Copeland-approved designation for reciprocating and scroll compressors on HFC refrigerants.
The number in an Emkarate name is useful only after it is checked against the ISO band and compressor requirements. RL170H is the clearest example: its 170 cSt viscosity is real, but "170" is not an ISO VG class.
| Grade | Viscosity at 40 °C | ISO class | Application wording |
|---|---|---|---|
| RL32H | 32.5 cSt | ISO VG 32 | Reciprocating, centrifugal and scroll compressors |
| RL32-3MAF | 32.5 cSt | ISO VG 32 | Copeland-approved designation for reciprocating and scroll compressors on HFC refrigerants |
| RL46H | 45.3 cSt | ISO VG 46 | Reciprocating and screw compressors |
| RL68H | 66.6 cSt | ISO VG 68 | Reciprocating, screw, centrifugal and scroll compressors |
| RL100H | 96.5 cSt | ISO VG 100 | Reciprocating and screw compressors |
| RL170H | 170 cSt | No ISO VG class | Screw compressors |
| RL220H | 215 cSt | ISO VG 220 | Screw and orbital vane rotary compressors |
The normal RL32H through RL220H grades are synthetic polyol ester (POE) refrigeration and air-conditioning lubricants made by CPI Fluid Engineering, part of The Lubrizol Corporation. RL32-3MAF is a separate product, even though it measures 32.5 cSt at 40 °C like RL32H.

RL32H and RL32-3MAF occupy the same viscosity band. Both are described as POE refrigeration lubricants with 32.5 cSt at 40 °C. They are still two separate product records with different selection wording.
RL32H is listed for reciprocating, centrifugal and scroll compressor service, with an approvals list that includes BITZER, BOCK, CARRIER, DORIN, FRASCOLD, McQUAY, REFCOMP, SABROE and other equipment manufacturers. The list belongs to RL32H and should not be copied onto RL32-3MAF.
RL32-3MAF is described as the Copeland-approved designation for reciprocating and scroll compressors using HFC refrigerants. Its product information gives a pour point of −46 °C, a viscosity index of 121 and a flash point of 258 °C. The same property set is also published for RL32H in the range data.
When an order asks for "Emkarate 32," the model, the compressor type and the wording on the service document decide which of the two records applies. A shared viscosity number is not enough to merge them.
RL46H is the 45.3 cSt grade in the range. The ISO VG 46 band runs from 41.4 to 50.6 cSt, so RL46H falls inside it without any conversion.
RL46H is listed for reciprocating and screw compressor service. The approvals named for this grade include BOCK, DORIN, ROLTEC and SABROE. Those names identify the equipment coverage listed for RL46H; they do not turn the grade into a universal replacement for every compressor using another 46-grade oil.
The practical check is short: confirm that the compressor documentation asks for POE, confirm the viscosity class, then match the part number to RL46H instead of ordering from the number alone.
RL68H measures 66.6 cSt at 40 °C. ISO VG 68 covers 61.2 to 74.8 cSt, which places RL68H inside the band. RL68H is listed for reciprocating, screw, centrifugal and scroll compressor applications.
The RL68H approval list is the broadest in this series. It names BITZER, BLISSFIELD, BOCK, CARRIER, CARRIER CARLYLE, DORIN, DUNHAM BUSH, FRASCOLD, GRASSO (GEA), HARTFORD, HISPACOLD, LOCKHEED MARTIN, McQUAY (J&E Hall), REFCOMP, SABROE and TRANE. This list is useful when a service document names a manufacturer but not a full oil description. It still has to be checked against the compressor model and the lubricant requirement.
RL68H is also the grade buyers are most likely to confuse with other 68 cSt POE products. The viscosity band is only one part of the order check. The oil family, OEM wording and refrigerant remain part of the same decision.
RL100H measures 96.5 cSt at 40 °C. ISO VG 100 covers 90 to 110 cSt, placing the grade inside the standard band. RL100H is listed for reciprocating and screw compressors, with BOCK, GRASSO (GEA), McQUAY (J&E Hall) and SABROE in its approval list.
RL100H is the next standard step above RL68H. The increase is not a reason to move from one to the other without a documented viscosity requirement. If the machine calls for ISO VG 100, RL100H is the matching grade in this range. If the machine calls for 68, the larger number is not an automatic upgrade.
RL170H measures 170 cSt at 40 °C. ISO VG 150 ends at 165 cSt, while ISO VG 220 begins at 198 cSt. There is no ISO band covering 170 cSt, and RL170H carries no ISO VG class.
That makes RL170H different from a normal step in the series. It should be ordered as RL170H or 170 cSt, not as ISO VG 170. It should also not be rounded down to VG150 or up to VG220. The viscosity number identifies this grade, while the ISO label is absent because the measured value falls between the two standard bands.
RL170H is listed only under screw compressors, with BITZER, DALIAN BINGSHAN, FRASCOLD, HANBELL, ROLTEC and SABROE in the approvals list. This is narrower application wording than RL68H or RL32H, so a screw-compressor request should include the exact model and the existing oil designation.

RL220H measures 215 cSt at 40 °C. ISO VG 220 covers 198 to 242 cSt, so the grade falls comfortably inside the band. RL220H is listed for screw compressors and orbital vane rotary compressors, with CARRIER, HANBELL, McQUAY (J&E Hall), SABROE and VATANU-COOL in its approvals list.
RL220H is the heaviest standard ISO grade in this set. The step from RL170H to RL220H is not a rounding exercise: RL170H has no ISO class, while RL220H is inside VG220. The compressor documentation has to decide which one belongs in the system.
Start with the oil wording in the compressor manual or nameplate. If it gives an ISO VG class, match the class to the RL grade: VG32 to RL32H, VG46 to RL46H, VG68 to RL68H, VG100 to RL100H and VG220 to RL220H.
If the request says 170 cSt, keep the order at RL170H and do not rewrite it as an ISO class. If the request says Copeland, HFC refrigerants and a 32-grade POE for a reciprocating or scroll compressor, check RL32-3MAF separately from RL32H.
Then confirm the compressor type and model. The product assignments differ by grade. RL32H and RL68H have broad application wording; RL170H is listed only for screw compressors; RL220H is listed for screw and orbital vane rotary compressors.
The final quotation should carry the grade name, compressor model, refrigerant, quantity, pack size and destination. That leaves a traceable reason for the selected viscosity instead of a number copied from a similar-looking pail.
No. RL170H is published at 170 cSt at 40 °C, between the ISO VG 150 band, which ends at 165 cSt, and the ISO VG 220 band, which begins at 198 cSt. RL170H has no ISO VG class.
They are separate products with the same 32.5 cSt at 40 °C viscosity. RL32H has broader compressor application wording, while RL32-3MAF is described as the Copeland-approved designation for reciprocating and scroll compressors on HFC refrigerants.
RL68H. Its viscosity is 66.6 cSt at 40 °C, inside the ISO VG 68 band of 61.2 to 74.8 cSt.
RL46H, RL68H, RL100H and RL170H are listed for screw compressors. RL220H is listed for screw and orbital vane rotary compressors. RL32H is listed for reciprocating, centrifugal and scroll compressors, while RL32-3MAF is worded for reciprocating and scroll compressors on HFC refrigerants.
Check the compressor model, refrigerant, oil type, viscosity wording, quantity, pack size and destination. For RL170H, keep the order in cSt or by the RL170H name because it has no ISO VG class.
Copyright & Citation Notice. This article is original content published by QishanrLubricants (Guangzhou Qishanr Technologies Co., Ltd.) at qishanrlubricants.com. Grade names, viscosities, ISO bands and application wording are based on the corresponding Emkarate product information. Quotation of up to 200 words with attribution and a link to this page is permitted for commercial and technical reference; reproduction in full requires written permission.