Ester Oil SW 68 (POE 68) Synthetic Refrigeration Compressor Lubricant
Buy premium SW 68 POE synthetic compressor oil. ISO VG 68 ester lubricant for HFC refrigerants (R134a, R410A, R404A). Replaces Icematic & Totaline SW 68.
View productFor OEMs, compressor rebuilders, wholesalers and private-label owners, QISHANR works as a poe refrigeration oil manufacturer, blending synthetic ester lubricants for HCFC, HFC and CO₂ systems. Buyers comparing a specialist refrigeration oil manufacturer against a general lubricant blender will find the reference product on this page: HANBELL Refrigeration Oil HBR-B01 — a synthetic ester POE / complex POE oil listed with the commercial terms a purchasing team needs before adding a supplier to an approved-vendor list.
Most HVACR buyers arrive with the same question: “Are you actually blending the oil, or are you reselling Emkarate, Bitzer or Denso stock?” The honest answer is that both paths exist in the market, and each carries a different risk profile. Use the matrix below to decide which model fits your qualification process before you request pricing.
| Decision factor | Genuine brand import | OEM-equivalent supply | Private label |
|---|---|---|---|
| Unit cost | Highest — brand, freight and distributor margin are all inside the price. | Direct-from-supplier pricing against a published spec sheet. | Mid to high — tooling, labels and minimum run volume sit on top of the oil cost. |
| OEM approval risk | Lowest technical risk where the compressor OEM already lists the brand. | Requires your OEM or end user to approve an equivalent TDS plus a batch COA. | Requires your own specification, artwork and market acceptance. |
| Lead time | Governed by the brand’s import cycle and local stock. | Quoted against the supplier’s stated supply ability; confirm per purchase order. | First run is longer because of label and packaging preparation. |
| Batch traceability | Brand documentation flows through a distributor rather than the blender. | COA per batch, retained samples and TDS/SDS issued by the supplier. | Documentation carries your brand, with batch records held by the blender. |
| Brand control | None — you promote someone else’s brand. | Limited — the pail carries the supplier’s label. | Full — your label, your price ladder, your market position. |
| Best-fit scenario | Emergency substitution where the end user insists on the original brand. | Rebuilders, service groups and OEMs able to approve an equivalent. | Distributors and wholesalers building a house lubricant line. |
Choose this when a warranty clause or an end-user specification names the brand. You accept the highest cost in exchange for the lowest approval friction.
Choose this when your team can evaluate a published TDS and a per-batch COA. You gain margin and shorter supply paths, and you take on the specification review.
Choose this when the oil is a repeat line item and your brand already has shelf presence. Expect a longer first run and a minimum volume commitment.
HBR-B01 is listed as a specially formulated synthetic ester oil — POE / complex POE — described on the product page as different from other POE lubricants used in HFC systems.
Synthetic ester oils are not interchangeable commodities. Base-oil selection, additive package and moisture control decide whether the finished oil protects a compressor or quietly damages it. The capability points below describe what the HBR-B01 listing confirms, and what is quoted per enquiry.
Synthetic ester POE / complex POE, positioned for rotary compressors including screw and scroll types.
Systems using HCFC-22 and HCFC-502 as the primary target, compatibility with CFC-13, miscibility with CFC-503, plus use with HFC and hydrocarbon mixed refrigerants.
The page states that, because of special additives, POE is also suitable for CO₂ applications — confirm your pressure and temperature envelope with the supplier.
HBR-B01 is listed at 18.9 L. Custom viscosity grades and custom pack or private-label formats are handled as a quotation item.
Ester base stock chosen against the target refrigerant and compressor duty.
Base stock and additive package combined to the agreed formulation.
Batch checked against the published technical values before release.
Pack filling, closure and labelling, including private-label artwork where agreed.
COA, retained sample and shipping documents issued with the order.
The values below are the HBR-B01 published data points. They apply to this product only and should not be transferred to other grades in the range.
| Parameter | Published value | Method / note |
|---|---|---|
| Product model | HBR-B01 | Listed as No. HANBELL HBR-B01 |
| Base chemistry | Synthetic ester POE / complex POE | Product description |
| Density | 8.75 lb/gal at 60 °F | As listed |
| Pour point | −31.67 °C | ASTM D97 |
| Flash point | 271 °C | ASTM D92, C.O.C. |
| Ignition point | 282 °C | As listed |
| Total acid number | < 0.15 mg KOH/g | ASTM D664 |
| Listed size | 18.9 L | Suitable for initial fills and top-offs |
Before price, the decisive question is fit. The HBR-B01 page maps the oil to specific equipment and duty cycles; matching those to your installation is what makes or breaks a specification.
Find the row that matches your installation. Each one pairs a use scenario with the product fact that matters and the action to take before you order.
| Your scenario | Product fact to check | Buyer action |
|---|---|---|
| Low-temperature cold storage on HCFC-22 | Pour point −31.67 °C (ASTM D97) and a stable viscosity profile | Confirm evaporating temperature and system oil charge, then request the batch COA. |
| Retrofitting an older CFC plant | Compatibility with CFC-13 and miscibility with CFC-503 | Agree the flush and changeover procedure with the supplier before specifying HBR-B01. |
| High-capacity screw or scroll compressor | High viscosity index, thermal stability and high lubricity | Size the oil charge and top-off frequency, then price 18.9 L pails against annual usage. |
| CO₂ application | Page states POE is suitable for CO₂ applications due to special additives | Verify the pressure and temperature envelope with the supplier before release. |
| Transport refrigeration fleet | Low pour point plus a stable viscosity profile | Confirm duty cycle and service interval; set a repeat-order quantity above the 10 pc MOQ. |
| HFC chiller with varnish history | Oxidative stability described as preventing varnish formation | Combine an oil change with a cleanliness check and file the COA in the maintenance record. |
The commercial terms below come from the HBR-B01 product listing. They are the numbers to send to your finance and logistics teams when you build the supplier file.
| Item | Term |
|---|---|
| Payment | T/T and L/C |
| Price terms | EXW, FOB, CFR, CIF |
| Supply ability | 1000 pcs per year (stated) |
| Minimum order | 10 pcs |
| Origin | China |
| Listed fill | 18.9 L |
Quote the Incoterm you need, your destination port and your annual volume. If you are comparing against an imported brand, attach the existing specification so the equivalent can be reviewed line by line. Orders above the stated supply ability should be scheduled in advance.
Every approval package needs paper behind the pail. The pack below is what your review and compliance reviewers will ask for.
The published values for HBR-B01, including pour point, flash point and total acid number.
Handling, storage and disposal information for synthetic ester refrigeration oil.
Issued per batch so the delivered oil can be traced to a tested blend.
Send these six points and the quotation can be prepared without a second round of questions.
Keep adjacent product options together for a faster catalog comparison.
Buy premium SW 68 POE synthetic compressor oil. ISO VG 68 ester lubricant for HFC refrigerants (R134a, R410A, R404A). Replaces Icematic & Totaline SW 68.
View product
Totaline SW220 POE compressor oil, ISO VG 220 ester lubricant for Carrier and Carlyle screw compressors with R134a, R404A, R410A and R507. 5L and 20L packs.
View product
Source DENSO ND-OIL 11 POE compressor oil for EV and hybrid electric vehicle A/C systems. Compatible with R134a and R1234yf. DENSO OEM 042198-0080, Toyota 08885-09127.
View productthe hbr-b01 product page publishes manufacturer-style commercial terms: moq 10 pcs, t/t and l/c payment, exw, fob, cfr and cif price terms, origin china, and a stated supply ability of 1000 pcs per year. qualification should still be completed against the current tds, a per-batch coa and an evaluation sample.
hbr-b01 is a synthetic ester poe / complex poe refrigeration oil. the product page describes it for rotary compressors, including screw and scroll types, with hcfc-22 and hcfc-502 systems as the primary target, compatibility with cfc-13, miscibility with cfc-503, and use with hfc and hydrocarbon mixed refrigerants. it also states that, because of special additives, poe is suitable for co₂ applications.
the listed table gives density 8.75 lb/gal at 60 °f, pour point −31.67 °c (astm d97), flash point 271 °c (astm d92, c.o.c.), ignition point 282 °c, and total acid number below 0.15 mg koh/g (astm d664). always confirm the figures on the current data sheet and the batch certificate before approval.
the listing is for 18.9 l, and the page notes that this quantity suits both initial fills and maintenance top-offs. ask the sales team to confirm alternative pack or drum formats, and any labelling requirement, for your order.
the minimum order is 10 pcs. payment is by t/t or l/c, and price terms are exw, fob, cfr or cif, with origin china. send your destination port and annual volume so the quotation can be issued with the matching incoterm.
use the quote button on the hbr-b01 product page or reach the team through the contact us page. you can also email sales012@qishanr.com or call +86-185 650 230 85. include refrigerant type, compressor type, viscosity requirement, annual volume and destination port for the fastest reply
