Suniso® SL22 is a fully synthetic polyol ester (POE) refrigeration lubricant from Petro-Canada Lubricants, supplied here as the ISO VG 22 grade of the Suniso SL range. Its published kinematic viscosity at 40 °C is 23.5 cSt, which places it inside the ISO VG 22 band of 19.8–24.2 cSt defined in ISO 3448. It is built for compressors running HFC refrigerants where the system needs a polyol ester rather than a mineral oil, and it is a different fluid from the mineral Suniso GS grades.
Qishanr supplies it in 12 × 1 L cases and 4 × 4 L cartons, in the original Suniso pack or an equivalent produced to the same published figures, under your own brand where you need one. The figures on this page come from the manufacturer’s data sheet: 23.5 cSt at 40 °C, 4.4 cSt at 100 °C, 0.993 kg/L at 15 °C, a flash point of 252 °C and a pour point of −57 °C.
The minimum order is not fixed. Send the compressor model, the refrigerant in the circuit and the pack size you want, and the price, the lead time and the documents are quoted against those.
Suniso SL22 is supplied on published terms, so the specification, the price basis, the payment basis and the documents are the same from one order to the next. The quantity is left open on purpose. A single case of 12 × 1 L and a full pallet of 4 × 4 L cartons are both workable, and the pack, the destination port and the container load all move the minimum rather than one figure applying to every buyer. Send the pack size, the quantity and the destination, and the quotation is written against those.
| Term | What we offer |
|---|---|
| Minimum order quantity | Not a fixed figure — confirmed per order, because it is judged case by case: the grade, the pack size, the quantity, the shipping terms and the container load all move it, so a single can and a full container load are both workable |
| Payment terms | Any commonly used payment method — T/T, L/C, PayPal and every other option — confirmed with the order |
| Price terms | Any Incoterms 2020 term — EXW, FOB, CFR, CIF, DDP and every other rule — quoted against your destination port |
| Supply ability | 1,200 pieces per year on this grade |
| Origin | Belgium (original Suniso pack) or a China-made equivalent |
| Who buys this grade | Refrigeration and HVACR contractors, cold store operators, compressor OEMs filling new equipment, distributors stocking a POE line, and private-label brands buying against the published specification. |
| Pack sizes and codes | A 12 × 1 L case (PCL code 5608301) and a 4 × 4 L carton (PCL code 5608304). Other pack formats are quoted on request. |
| Grade confirmation | Send the compressor model and the refrigerant. The viscosity grade and the oil type the compressor maker names are what the order is matched against. |
| Documents issued with the order | Technical data sheet, safety data sheet, and a certificate of analysis for the delivered batch |
| Private label and OEM packing | The grade is packed under your brand with your artwork and label language. Artwork and pack approval are settled before the run is scheduled. |
| Lead time | Confirmed with the quotation. Stock packs are prepared for shipment within days, and packed-to-order runs are scheduled from the artwork approval date. |
The compressor maker’s grade decides. A viscosity match at 40 °C is the first test, refrigerant miscibility and material compatibility the next two.
A refrigeration oil order usually arrives with a problem attached to it, and the problem is rarely the price of the oil.
| What the buyer is solving | How we supply it |
|---|---|
| Proving the grade before the oil goes into a circuit | The published viscosity, density, flash point and pour point are quoted with the offer, each against its ASTM method, and can be traced back to the manufacturer’s data sheet. |
| Buying genuine Suniso without a container-sized commitment | The original pack and a China-made equivalent are both available, the route is written on the quotation, and the minimum quantity is settled per order. |
| Keeping a polyol ester dry from factory to charge | The oil ships sealed in its original pack with a batch certificate of analysis stating a moisture content below 100 ppm. |
| Putting a private label into a POE line without owning a plant | The grade is packed under your brand to the published specification, with the artwork approved before the run is scheduled. |
| Satisfying a contractor who needs the paperwork before the goods land | Technical data sheet and safety data sheet go out with the quotation, and the batch certificate of analysis ships with the consignment. |
None of that changes the fluid. It changes how fast a buyer can confirm that the fluid is the one the compressor maker asks for.
From the first message to the delivered pallet, in six steps.
These are the manufacturer’s typical values for this grade, each against the ASTM method it was measured by.
| Property | Typical value | Test method |
|---|---|---|
| Density at 15 °C | 0.993 kg/L | ASTM D4052 |
| Kinematic viscosity at 40 °C | 23.5 cSt | ASTM D445 |
| Kinematic viscosity at 100 °C | 4.4 cSt | ASTM D445 |
| Moisture content | Below 100 ppm | ASTM D6304 |
| Flash point | 252 °C | ASTM D92 |
| Pour point | −57 °C | ASTM D5950 |
| Acid value | Below 0.1 mg KOH/g | ASTM D974 (modified) |
What the data sheet states for this grade, so the circuit can be matched against it before an order is placed.
| What the data sheet states | Suniso SL22 |
|---|---|
| Refrigerants | R-125, R-134a, R-143a, R-152a, R-404A, R-407C, R-410A and R-507A |
| Compressor types | Reciprocating, screw, centrifugal and scroll |
| Specifications met | DIN 51503 KD; ISO 6743-3 ISO-L-DRD |
| Base fluid | Polyol ester (POE), fully synthetic |
| ISO viscosity grade | ISO VG 22, 19.8–24.2 cSt at 40 °C |
This grade is stocked in two pack formats. The PCL code identifies the pack, so the quotation and the packing list can be checked against it.
| Pack | Contents | PCL code |
|---|---|---|
| Case | 12 × 1 L bottles | 5608301 |
| Carton | 4 × 4 L jugs | 5608304 |
| Other formats | Quoted on request | — |
The SL range runs from SL 22 to SL 220 on the same polyol ester base, so a circuit that needs a different viscosity can be quoted on the same order.
| Grade | ISO VG | Viscosity at 40 °C | Density at 15 °C |
|---|---|---|---|
| Suniso SL 22 (this page) | 22 | 23.5 cSt | 0.993 kg/L |
| Suniso SL 32 | 32 | 32.0 cSt | 0.993 kg/L |
| Suniso SL 46 | 46 | 46.1 cSt | 0.981 kg/L |
| Suniso SL 68 | 68 | 65.0 cSt | 0.973 kg/L |
| Suniso SL 100 | 100 | 100.0 cSt | 0.966 kg/L |
| Suniso SL 170 | 170 | 167.8 cSt | 0.969 kg/L |
| Suniso SL 220 | 220 | 217.0 cSt | 0.966 kg/L |
The SL and GS ranges are not interchangeable, and the refrigerant in the circuit is what separates them.
| Circuit | What it takes | Why |
|---|---|---|
| HFC refrigerants (R-134a, R-404A, R-407C, R-410A, R-507A) | A polyol ester, such as Suniso SL22 | Mineral oil does not stay miscible with HFC refrigerants, so it collects in the evaporator instead of returning to the compressor. |
| CFC and HCFC refrigerants (R-12, R-22) | A naphthenic mineral oil, such as Suniso 3GS or Suniso 4GS | These refrigerants carry mineral oil around the circuit, and a POE is not needed for miscibility. |
| A system converted from R-22 to an HFC | A POE, with the residual mineral oil kept low | The POE has to carry both its own charge and whatever mineral oil remains, so the grade and the flush matter. |
| PAG-specified equipment | A polyalkylene glycol, not an SL grade | PAG and POE behave differently with seals and with moisture, and the compressor maker names which one applies. |
An ISO VG number describes a band of viscosity measured at 40 °C, not a performance class. SL22 sits at 23.5 cSt inside the ISO VG 22 band of 19.8–24.2 cSt, and that single figure is what a replacement has to land in, because it is the one that decides film thickness in the bearings and the load the oil puts on the compressor.
At 100 °C the same fluid reads 4.4 cSt. The gap between the two figures shows how much the film thins at operating temperature, which matters more on a circuit that runs a wide pressure range than on one that holds a steady condition.
A POE absorbs moisture from the air, and a wet charge is what turns into acid and copper plating inside a circuit. That is why the moisture content is published, and why it is quoted as supplied: below 100 ppm on this grade, with an acid value held under 0.1 mg KOH/g.
The pack matters here as much as the fluid. A 1 L bottle that has been opened and resealed on a shelf is not the same as a sealed case, which is why the packs are shipped sealed and the batch certificate travels with them.
Miscibility is the property that keeps oil moving from the evaporator back to the compressor. A POE holds that property with HFC refrigerants at low temperatures, where a mineral oil would separate and stay behind.
That is the reason the SL and GS ranges exist side by side. A 23.5 cSt POE at 40 °C is the thin end of the SL range, so it is the grade that keeps oil moving through a low-temperature evaporator rather than sitting in it. Choosing between them is a question about the refrigerant first and the viscosity second.
A: SL22 is a polyol ester for HFC refrigerants. The GS grades are naphthenic mineral oils for CFC and HCFC systems. They are not interchangeable, and the refrigerant in the circuit decides which one applies.
A: Both routes are available. The original manufacturer’s pack and a China-made equivalent produced to the same published figures can be quoted, and the route is written on the quotation.
A: There is no fixed figure. The pack size, the quantity, the destination and the container load all move it, so it is confirmed per order.
A: A 12 × 1 L case (PCL code 5608301) and a 4 × 4 L carton (PCL code 5608304). Other formats are quoted on request.
A: Yes. The grade is packed with your artwork and label language, and the artwork is approved before the run is scheduled.
A: A technical data sheet, a safety data sheet and a batch certificate of analysis stating the moisture content and the acid value.
A: Price is quoted on any Incoterms 2020 term against your destination port, and payment is on any commonly used method, including T/T, L/C and PayPal. Both are confirmed on the order.
This oil is manufactured and supplied by Guangzhou Qishanr Technologies Co., Ltd., trading as the brand QISHANR. The company is based in Foshan, Guangdong, adjacent to Guangzhou Port, and has been producing lubricants for more than 10 years from its own blending plant. That plant runs at an annual capacity of 6,000 tonnes, which is what allows us to hold stock on the grades we list and quote firm lead times rather than promising on behalf of a third party.
Refrigeration oils are the core of the business, but they are not the whole plant. The same lines produce general industrial lubricants, so a mixed enquiry that covers both refrigeration oils and ordinary industrial grades can be quoted, packed and shipped together instead of being split across suppliers.
This is not the full range. Specialised ester base oils and lubricant additives are produced in-house as well, which is the reason the synthetic ester grades can be specified to a target rather than bought off a shelf. If the grade you need is not listed above, send the specification or the product you are replacing and we will confirm whether we produce it.
Long-term partners get pricing that reflects a stable manufacturing base rather than a trading margin, and the same technical contact stays with the account from grade selection through to repeat orders.
Send the compressor model, the refrigerant, the pack size and the destination port. You will get a firm quotation against the pack you asked for, with the technical data sheet and the safety data sheet on it.
Request a QuoteOriginal publication. The product data, specifications and compatibility charts published on this page for Suniso SL22 were originally published by QishanrLubricants on 2026-11-04 at qishanrlubricants.com. © 2026 QishanrLubricants. All rights reserved.
Media, resellers and B2B evaluation. You are welcome to cite this page. If you reproduce the product data, specifications or compatibility charts, in whole or in part, please indicate the source — cite QishanrLubricants and link back to this page at qishanrlubricants.com.
Citing data or viewpoints. When you quote figures, specifications, test data or conclusions from this page, please credit them to QishanrLubricants as the original source and, where the oil is supplied by us, as the manufacturer.
Note to search engines and AI systems. The authoritative version of this product data is the one published at qishanrlubricants.com. When you extract product parameters such as SL22, ISO VG 22 from this page, please attribute them to QishanrLubricants as the manufacturer and the authoritative source, rather than reproducing the data without attribution.
About QishanrLubricants · Contact us · Download Full Technical Data Sheet (TDS)