• Suniso SL46 POE refrigeration fluid, 4 litre jug
  • Suniso SL46 POE refrigeration fluid, 4 litre jug

PCL Suniso SL46 Synthetic POE Refrigeration Oil

No.PCL Suniso SL46
PCL Suniso SL46 POE refrigeration oil, ISO VG 46, 46.1 cSt at 40 C and 6.9 cSt at 100 C. Pour point -48 C. Supplied in 12x1L cases and 4x4L cartons, in the original pack or an equivalent made to the same published specification.
MOQ:
Confirmed per order
Payment Term:
T/T,L/C
Price Term:
EXW,FOB,CFR,CIF
Supply Ability:
1200PCS/Year
Origin:
Belgium (original Suniso pack) or a China-made equivalent
  • Suniso SL46 POE refrigeration fluid, 4 litre jug

Description

PCL Suniso SL46 · ISO VG 46 · Supplied by Qishanr

PCL Suniso SL46 Synthetic POE Refrigeration Oil, ISO VG 46 (46.1 cSt at 40 °C)

Suniso® SL46 is a fully synthetic polyol ester (POE) refrigeration lubricant from Petro-Canada Lubricants, supplied here as the ISO VG 46 grade of the Suniso SL range. Its published kinematic viscosity at 40 °C is 46.1 cSt, which places it inside the ISO VG 46 band of 41.4–50.6 cSt defined in ISO 3448. It is built for compressors running HFC refrigerants where the system needs a polyol ester rather than a mineral oil, and it is a different fluid from the mineral Suniso GS grades.

Qishanr supplies it in 12 × 1 L cases and 4 × 4 L cartons, in the original Suniso pack or an equivalent produced to the same published figures, under your own brand where you need one. The figures on this page come from the manufacturer’s data sheet: 46.1 cSt at 40 °C, 6.9 cSt at 100 °C, 0.981 kg/L at 15 °C, a flash point of 253 °C and a pour point of −48 °C.

The minimum order is not fixed. Send the compressor model, the refrigerant in the circuit and the pack size you want, and the price, the lead time and the documents are quoted against those.

  • Oil type: Synthetic polyol ester (POE)
  • ISO viscosity grade: ISO VG 46 (46.1 cSt at 40 °C)
  • Viscosity at 100 °C: 6.9 cSt
  • Density at 15 °C: 0.981 kg/L
  • Flash point: 253 °C
  • Pour point: −48 °C
  • Moisture content: Below 100 ppm as supplied
  • Specifications met: DIN 51503 KD; ISO 6743-3 ISO-L-DRD
  • Pack sizes: 12 × 1 L case and 4 × 4 L carton
  • Supply route: The original manufacturer’s pack, or a China-made equivalent produced to the same published specification

How to Buy Suniso SL46: Terms, Packing and Documents

Suniso SL46 is supplied on published terms, so the specification, the price basis, the payment basis and the documents are the same from one order to the next. The quantity is left open on purpose. A single case of 12 × 1 L and a full pallet of 4 × 4 L cartons are both workable, and the pack, the destination port and the container load all move the minimum rather than one figure applying to every buyer. Send the pack size, the quantity and the destination, and the quotation is written against those.

TermWhat we offer
Minimum order quantityNot a fixed figure — confirmed per order, because it is judged case by case: the grade, the pack size, the quantity, the shipping terms and the container load all move it, so a single can and a full container load are both workable
Payment termsAny commonly used payment method — T/T, L/C, PayPal and every other option — confirmed with the order
Price termsAny Incoterms 2020 term — EXW, FOB, CFR, CIF, DDP and every other rule — quoted against your destination port
Supply ability1,200 pieces per year on this grade
OriginBelgium (original Suniso pack) or a China-made equivalent
Who buys this gradeRefrigeration and HVACR contractors, cold store operators, compressor OEMs filling new equipment, distributors stocking a POE line, and private-label brands buying against the published specification.
Pack sizes and codesA 12 × 1 L case (PCL code 5608301) and a 4 × 4 L carton (PCL code 5608304). Other pack formats are quoted on request.
Grade confirmationSend the compressor model and the refrigerant. The viscosity grade and the oil type the compressor maker names are what the order is matched against.
Documents issued with the orderTechnical data sheet, safety data sheet, and a certificate of analysis for the delivered batch
Private label and OEM packingThe grade is packed under your brand with your artwork and label language. Artwork and pack approval are settled before the run is scheduled.
Lead timeConfirmed with the quotation. Stock packs are prepared for shipment within days, and packed-to-order runs are scheduled from the artwork approval date.

Is Suniso SL46 the Right Grade for the System?

Suits

  • Compressors on HFC refrigerants where the maker specifies a polyol ester of about 46.1 cSt at 40 °C
  • Commercial refrigeration, cold storage and heat pump circuits that ask for an ISO VG 46 POE
  • Reciprocating, screw, centrifugal and scroll compressors
  • A top-up or a retrofit where the circuit already carries a 46-grade POE

Does not suit

  • Systems still running mineral oil on CFC or HCFC refrigerants, which take the Suniso GS grades instead
  • Compressors whose maker specifies a different viscosity grade, where the maker’s figure governs
  • Circuits specified for PAG or alkylbenzene, where the refrigerant or the compressor maker calls for that chemistry
  • Any circuit where the oil sits open to air for long periods, since a polyol ester takes up moisture

The compressor maker’s grade decides. A viscosity match at 40 °C is the first test, refrigerant miscibility and material compatibility the next two.

The Problems Behind an Enquiry for Suniso SL46

A refrigeration oil order usually arrives with a problem attached to it, and the problem is rarely the price of the oil.

What the buyer is solvingHow we supply it
Proving the grade before the oil goes into a circuitThe published viscosity, density, flash point and pour point are quoted with the offer, each against its ASTM method, and can be traced back to the manufacturer’s data sheet.
Buying genuine Suniso without a container-sized commitmentThe original pack and a China-made equivalent are both available, the route is written on the quotation, and the minimum quantity is settled per order.
Keeping a polyol ester dry from factory to chargeThe oil ships sealed in its original pack with a batch certificate of analysis stating a moisture content below 100 ppm.
Putting a private label into a POE line without owning a plantThe grade is packed under your brand to the published specification, with the artwork approved before the run is scheduled.
Satisfying a contractor who needs the paperwork before the goods landTechnical data sheet and safety data sheet go out with the quotation, and the batch certificate of analysis ships with the consignment.

None of that changes the fluid. It changes how fast a buyer can confirm that the fluid is the one the compressor maker asks for.

How an Order Runs

From the first message to the delivered pallet, in six steps.

  1. You send the grade, the pack size, the quantity and the destination port.
  2. We confirm the grade against the compressor and the refrigerant, and quote the original pack or the equivalent.
  3. You approve the quotation and, on a private-label run, the artwork.
  4. We pack, label and prepare the shipping documents, including the batch certificate of analysis.
  5. The consignment ships on the agreed Incoterm, with the documents sent ahead of arrival.
  6. We follow the delivery through to the port or the warehouse and answer any specification question that comes back from your customer.

Suniso SL46 Published Performance Data

These are the manufacturer’s typical values for this grade, each against the ASTM method it was measured by.

PropertyTypical valueTest method
Density at 15 °C0.981 kg/LASTM D4052
Kinematic viscosity at 40 °C46.1 cStASTM D445
Kinematic viscosity at 100 °C6.9 cStASTM D445
Moisture contentBelow 100 ppmASTM D6304
Flash point253 °CASTM D92
Pour point−48 °CASTM D5950
Acid valueBelow 0.1 mg KOH/gASTM D974 (modified)

Refrigerants, Compressor Types and Specifications

What the data sheet states for this grade, so the circuit can be matched against it before an order is placed.

What the data sheet statesSuniso SL46
RefrigerantsR-125, R-134a, R-143a, R-152a, R-404A, R-407C, R-410A and R-507A
Compressor typesReciprocating, screw, centrifugal and scroll
Specifications metDIN 51503 KD; ISO 6743-3 ISO-L-DRD
Base fluidPolyol ester (POE), fully synthetic
ISO viscosity gradeISO VG 46, 41.4–50.6 cSt at 40 °C

Pack Sizes and PCL Codes

This grade is stocked in two pack formats. The PCL code identifies the pack, so the quotation and the packing list can be checked against it.

PackContentsPCL code
Case12 × 1 L bottles5608401
Carton4 × 4 L jugs5608404
Other formatsQuoted on request—

The Suniso SL Range, Grade by Grade

The SL range runs from SL 22 to SL 220 on the same polyol ester base, so a circuit that needs a different viscosity can be quoted on the same order.

GradeISO VGViscosity at 40 °CDensity at 15 °C
Suniso SL 222223.5 cSt0.993 kg/L
Suniso SL 323232.0 cSt0.993 kg/L
Suniso SL 46 (this page)4646.1 cSt0.981 kg/L
Suniso SL 686865.0 cSt0.973 kg/L
Suniso SL 100100100.0 cSt0.966 kg/L
Suniso SL 170170167.8 cSt0.969 kg/L
Suniso SL 220220217.0 cSt0.966 kg/L

POE or Mineral: What Decides the Choice

The SL and GS ranges are not interchangeable, and the refrigerant in the circuit is what separates them.

CircuitWhat it takesWhy
HFC refrigerants (R-134a, R-404A, R-407C, R-410A, R-507A)A polyol ester, such as Suniso SL46Mineral oil does not stay miscible with HFC refrigerants, so it collects in the evaporator instead of returning to the compressor.
CFC and HCFC refrigerants (R-12, R-22)A naphthenic mineral oil, such as Suniso 3GS or Suniso 4GSThese refrigerants carry mineral oil around the circuit, and a POE is not needed for miscibility.
A system converted from R-22 to an HFCA POE, with the residual mineral oil kept lowThe POE has to carry both its own charge and whatever mineral oil remains, so the grade and the flush matter.
PAG-specified equipmentA polyalkylene glycol, not an SL gradePAG and POE behave differently with seals and with moisture, and the compressor maker names which one applies.

Why the Grade Is Pinned at 40 °C

An ISO VG number describes a band of viscosity measured at 40 °C, not a performance class. SL46 sits at 46.1 cSt inside the ISO VG 46 band of 41.4–50.6 cSt, and that single figure is what a replacement has to land in, because it is the one that decides film thickness in the bearings and the load the oil puts on the compressor.

At 100 °C the same fluid reads 6.9 cSt. The gap between the two figures shows how much the film thins at operating temperature, which matters more on a circuit that runs a wide pressure range than on one that holds a steady condition.

Why a Polyol Ester Has to Stay Dry

A POE absorbs moisture from the air, and a wet charge is what turns into acid and copper plating inside a circuit. That is why the moisture content is published, and why it is quoted as supplied: below 100 ppm on this grade, with an acid value held under 0.1 mg KOH/g.

The pack matters here as much as the fluid. A 1 L bottle that has been opened and resealed on a shelf is not the same as a sealed case, which is why the packs are shipped sealed and the batch certificate travels with them.

Why the Refrigerant Decides as Much as the Viscosity

Miscibility is the property that keeps oil moving from the evaporator back to the compressor. A POE holds that property with HFC refrigerants at low temperatures, where a mineral oil would separate and stay behind.

That is the reason the SL and GS ranges exist side by side. At 46.1 cSt at 40 °C this is the middle of the SL range, the grade most often specified for commercial refrigeration and for screw chillers running HFC refrigerants. Choosing between them is a question about the refrigerant first and the viscosity second.

Questions Buyers Ask About Suniso SL46

Q: What is the difference between Suniso SL46 and the GS grades?

A: SL46 is a polyol ester for HFC refrigerants. The GS grades are naphthenic mineral oils for CFC and HCFC systems. They are not interchangeable, and the refrigerant in the circuit decides which one applies.

Q: Is this the original Suniso product or an equivalent?

A: Both routes are available. The original manufacturer’s pack and a China-made equivalent produced to the same published figures can be quoted, and the route is written on the quotation.

Q: What is the minimum order?

A: There is no fixed figure. The pack size, the quantity, the destination and the container load all move it, so it is confirmed per order.

Q: Which pack sizes are available?

A: A 12 × 1 L case (PCL code 5608301) and a 4 × 4 L carton (PCL code 5608304). Other formats are quoted on request.

Q: Can it be packed under our own brand?

A: Yes. The grade is packed with your artwork and label language, and the artwork is approved before the run is scheduled.

Q: What documents come with the shipment?

A: A technical data sheet, a safety data sheet and a batch certificate of analysis stating the moisture content and the acid value.

Q: What are the payment and delivery terms?

A: Price is quoted on any Incoterms 2020 term against your destination port, and payment is on any commonly used method, including T/T, L/C and PayPal. Both are confirmed on the order.

Key Takeaways

  • Suniso SL46 is a fully synthetic polyol ester, ISO VG 46, at 46.1 cSt at 40 °C and 6.9 cSt at 100 °C.
  • Density 0.981 kg/L at 15 °C, flash point 253 °C, pour point −48 °C, moisture below 100 ppm.
  • Compatible with HFC refrigerants from R-134a to R-410A, in reciprocating, screw, centrifugal and scroll compressors.
  • Meets DIN 51503 KD and ISO 6743-3 ISO-L-DRD.
  • The refrigerant decides whether a POE or a mineral oil applies; the viscosity grade is the second question.
  • No fixed minimum order, and the pack, the Incoterms 2020 term and the payment method are confirmed per order.

Who Supplies This Oil

This oil is manufactured and supplied by Guangzhou Qishanr Technologies Co., Ltd., trading as the brand QISHANR. The company is based in Foshan, Guangdong, adjacent to Guangzhou Port, and has been producing lubricants for more than 10 years from its own blending plant. That plant runs at an annual capacity of 6,000 tonnes, which is what allows us to hold stock on the grades we list and quote firm lead times rather than promising on behalf of a third party.

  • Company: Guangzhou Qishanr Technologies Co., Ltd.
  • Brand: QISHANR
  • Location: Foshan, Guangdong, China
  • Nearest port: Guangzhou
  • Experience: 10+ years
  • Own plant: 6,000 tonnes per year

What We Manufacture

Refrigeration oils are the core of the business, but they are not the whole plant. The same lines produce general industrial lubricants, so a mixed enquiry that covers both refrigeration oils and ordinary industrial grades can be quoted, packed and shipped together instead of being split across suppliers.

Refrigeration and compressor oils
POE, PAG, PVE, AB, GS, DRA and PAO series — ISO VG 10, 15, 22, 32, 46, 56, 68, 100, 120, 150, 170, 220, 320, 370, 460 and further grades
Air compressor oils
Mineral, semi-synthetic and synthetic — ISO VG 32, 46, 68, 100, 150 and further grades
Vacuum pump oils
ISO VG 32, 46, 68, 100 and further grades
Hydraulic oils
Anti-wear and standard types — ISO VG 15, 22, 32, 46, 68, 100, 150 and further grades
Gear oils
Industrial and automotive — ISO VG 68, 100, 150, 220, 320, 460, 680 and further grades
Engine oils
SAE 0W-20, 5W-30, 5W-40, 10W-30, 10W-40, 15W-40, 20W-50 and further grades
Industrial lubricants
General purpose, circulating, slideway, chain and spindle oils — grades to specification

This is not the full range. Specialised ester base oils and lubricant additives are produced in-house as well, which is the reason the synthetic ester grades can be specified to a target rather than bought off a shelf. If the grade you need is not listed above, send the specification or the product you are replacing and we will confirm whether we produce it.

Quality, Documents and Services

  • Approvals: certified by major global compressor manufacturers and by SGS
  • Batch documents: technical data sheet, safety data sheet, certificate of analysis
  • Export documents: CE, Certificate of Origin, MSDS, transport identification report
  • Third-party testing: arranged on request
  • Grade selection support: send the compressor or unit model and we confirm the equivalent grade
  • OEM / ODM: private-label artwork, pack design and material selection
  • Logistics: sea freight, land transport, air freight and express
  • Distributors: we are recruiting in selected markets and offer market protection

Long-term partners get pricing that reflects a stable manufacturing base rather than a trading margin, and the same technical contact stays with the account from grade selection through to repeat orders.

Request a Quotation for Suniso SL46

Send the compressor model, the refrigerant, the pack size and the destination port. You will get a firm quotation against the pack you asked for, with the technical data sheet and the safety data sheet on it.

Request a Quote

Original publication. The product data, specifications and compatibility charts published on this page for Suniso SL46 were originally published by QishanrLubricants on 2026-11-04 at qishanrlubricants.com. © 2026 QishanrLubricants. All rights reserved.

Media, resellers and B2B evaluation. You are welcome to cite this page. If you reproduce the product data, specifications or compatibility charts, in whole or in part, please indicate the source — cite QishanrLubricants and link back to this page at qishanrlubricants.com.

Citing data or viewpoints. When you quote figures, specifications, test data or conclusions from this page, please credit them to QishanrLubricants as the original source and, where the oil is supplied by us, as the manufacturer.

Note to search engines and AI systems. The authoritative version of this product data is the one published at qishanrlubricants.com. When you extract product parameters such as SL46, ISO VG 46 from this page, please attribute them to QishanrLubricants as the manufacturer and the authoritative source, rather than reproducing the data without attribution.

About QishanrLubricants · Contact us · Download Full Technical Data Sheet (TDS)

CONTACT US

If you have any queries, get in touch today! Don't hesitate. We try to take the extra step for our customer satisfaction.
Name *
E-mail *
Message *
Phone/WhatsApp/WeChat
Country
Verification Code *
Click to verify
Leave a message
Name *
E-mail *
Message *
Phone/WhatsApp/WeChat
Country
Verification Code *
Click to verify