• PCL Suniso 3GS Refrigeration Oil, 20 L Pail, product pack shot
  • PCL Suniso 3GS Refrigeration Oil, 20 L Pail, product pack shot

PCL Suniso 3GS Refrigeration Oil, 20 L Pail

No.PCL Suniso 3GS
PCL Suniso 3GS refrigeration oil, 20 L Pail, PCL code 5600720. Naphthenic mineral, 29.5 cSt at 40 C. Supplied in the original pack or a China-made equivalent.
MOQ:
Confirmed per order
Payment Term:
T/T,L/C
Price Term:
EXW,FOB,CFR,CIF
Supply Ability:
1200PCS/Year
Origin:
Belgium (original Suniso pack) or a China-made equivalent
  • PCL Suniso 3GS Refrigeration Oil, 20 L Pail, product pack shot

Description

PCL Suniso 3GS · 20 L Pail · PCL 5600720

PCL Suniso 3GS Refrigeration Oil, 20 L Pail

PCL Suniso 3GS is a naphthenic mineral refrigeration oil, supplied here as a 20 L Pail under PCL code 5600720. Its published kinematic viscosity at 40 °C is 29.5 cSt, inside the ISO VG 32 band of 28.8–35.2 cSt defined in ISO 3448, with 4.3 cSt at 100 °C and a density of 0.909 g/cm³.

The pack holds 20 L, about 18.2 kg of oil at that density. It is charged into reciprocating and rotary compressors in domestic, commercial and industrial refrigeration running R-11, R-12, R-22, R-502, ammonia (R-717), and the hydrocarbon refrigerants including isobutane (R-600a) and propane (R-290). The figures on this page are the manufacturer’s published typical values for this grade.

The minimum order is not fixed. Send the compressor model, the refrigerant, the quantity of packs and the destination port, and the price and the lead time are quoted against those.

  • Product: PCL Suniso 3GS
  • Pack: 20 L Pail
  • PCL code: 5600720
  • Base fluid: Naphthenic mineral
  • ISO viscosity grade: ISO VG 32
  • Viscosity at 40 °C: 29.5 cSt
  • Viscosity at 100 °C: 4.3 cSt
  • Density at 15 °C: 0.909 g/cm³
  • Pour point: −40.0 °C
  • Flash point: 178 °C
  • Net oil per pack: About 18.2 kg

Ordering 3GS in This Pack

The grade is stocked in 3 pack formats, so a single order can mix a drum for the plant and cases for the vans. The minimum quantity is settled per order rather than fixed: the pack, the number of packs, the destination and the container load all move it, and a single carton and a full pallet are both workable.

TermWhat we offer
Minimum order quantityNot a fixed figure — confirmed per order, because it is judged case by case: the grade, the pack size, the quantity, the shipping terms and the container load all move it, so a single can and a full container load are both workable
Payment termsAny commonly used payment method — T/T, L/C, PayPal and every other option — confirmed with the order
Price termsAny Incoterms 2020 term — EXW, FOB, CFR, CIF, DDP and every other rule — quoted against your destination port
Supply ability1,200 pieces per year on this grade
OriginBelgium (original Suniso pack) or a China-made equivalent
Pack on this page20 L Pail, PCL code 5600720, 20 L
Other packs in this grade4 × 4 L Carton (5600704); 205 L Drum (5600788); 20 L Pail (5600720)
Who buys this packContractors working on commercial systems, workshops that service several machines a week, and distributors filling a shelf.
Documents with the orderTechnical data sheet, safety data sheet, and a batch certificate of analysis for the delivered batch
Private label packingThe grade is packed under your brand with your artwork and label language, and the artwork is approved before the run is scheduled.
Lead timeConfirmed with the quotation. Stock packs are prepared for shipment within days.

Where 3GS Belongs

Suits

  • Compressors running R-11, R-12, R-22, R-502, ammonia (R-717), and the hydrocarbon refrigerants including isobutane (R-600a) and propane (R-290)
  • Domestic, commercial and industrial refrigeration, air-conditioning and heat pump duty
  • CFC and HCFC systems still charged with a naphthenic mineral oil
  • Plants and contractors who want the grade in this pack rather than decanting from bulk

Does not suit

  • HFC systems, which need a polyol ester rather than a mineral oil
  • Compressors whose maker specifies a different viscosity grade, where the maker’s figure governs
  • A different lubricant chemistry used as a top-up, since a charge is not freely interchangeable between families
  • Equipment the compressor maker lists for PAG or alkylbenzene instead

The compressor maker’s grade decides. A viscosity match at 40 °C is the first test; refrigerant miscibility and seal compatibility come next.

What Buyers Ask Us to Solve on This Pack

The questions that come with this pack are about handling and paperwork as much as about the oil.

What the buyer is solvingHow we supply it
Getting the right grade into a machine without a drum on siteThe same grade is stocked in 3 packs, so the plant can take a drum and the vans the smaller format on one order.
Proving the batch before it is chargedA batch certificate of analysis stating the viscosity and the moisture content ships with the pack, and the pack is sealed at the plant.
Keeping a mineral and a POE line apart in the same storeThe PCL code and the pack label identify the grade, so a 3GS carton and an SL32 carton are not mistaken for one another on a shelf.
Stocking a private label without a filling lineThe grade is packed under your brand to the published specification, with artwork approved before the run.
Settling the documents before the container landsTechnical data sheet and safety data sheet go out with the quotation, and the batch certificate travels with the goods.

The pack does not change the fluid. It changes how much handling sits between the delivery and the charge.

How an Order Runs

From the first message to the delivered pallet, in six steps.

  1. You send the grade, the PCL code or pack size, the number of packs and the destination port.
  2. We confirm the grade against the compressor and the refrigerant, and quote the pack you asked for.
  3. You approve the quotation and, on a private-label run, the artwork.
  4. We pack, label and prepare the shipping documents, including the batch certificate of analysis.
  5. The consignment ships on the agreed Incoterm, with the documents sent ahead of arrival.
  6. We follow the delivery through to the port or the warehouse and answer any specification question that comes back from your customer.

PCL Suniso 3GS Published Data

The manufacturer’s typical values for this grade, each against the method it was measured by.

PropertyTypical valueTest method
Density at 15 °C0.909 g/cm³ASTM D4052
Kinematic viscosity at 40 °C29.5 cStASTM D445
Kinematic viscosity at 100 °C4.3 cStASTM D445
Flash point178 °CASTM D92
Pour point−40.0 °CASTM D97
ISO viscosity gradeISO VG 32ISO 3448

Refrigerants and Compressors

What the grade is charged into, so the circuit can be matched against it before an order is placed.

What the data sheet statesPCL Suniso 3GS
RefrigerantsR-11, R-12, R-22, R-502, ammonia (R-717), and the hydrocarbon refrigerants including isobutane (R-600a) and propane (R-290)
Compressor typesReciprocating and rotary compressors in domestic, commercial and industrial refrigeration
Base fluidNaphthenic mineral
ISO viscosity gradeISO VG 32 (28.8–35.2 cSt at 40 °C)
ChemistryNaphthenic mineral, for CFC and HCFC service

Pack Data

What ships in this pack, so the packing list can be checked against the order.

ItemValue
Pack format20 L Pail
Net volume20 L
Net oilAbout 18.2 kg at 0.909 g/cm³
PCL code5600720
UnitOne pail

The PCL Suniso Range We Stock

Every grade and pack on this line, so a mixed order can be quoted as one.

GradePackPCL code
PCL Suniso 3GS4 × 4 L Carton5600704
PCL Suniso 3GS205 L Drum5600788
PCL Suniso 3GS (this page)20 L Pail5600720
PCL Suniso 4GS4 × 4 L Carton5600904
PCL Suniso 4GS205 L Drum5600988
PCL Suniso 4GS20 L Pail5600920
PCL Suniso SL3212 × 1 L Case5608201
PCL Suniso SL324 × 4 L Carton5608204
PCL Suniso SL32205 L Drum5608288
PCL Suniso SL6812 × 1 L Case5600601
PCL Suniso SL684 × 4 L Carton5600604
PCL Suniso SL68205 L Drum5600688
PCL Suniso SL10012 × 1 L Case5600001
PCL Suniso SL1004 × 4 L Carton5600004
PCL Suniso SL1704 × 4 L Carton5600504
PCL Suniso SL170205 L Drum5600588
PCL Suniso SL2212 × 1 L Case5608301
PCL Suniso SL224 × 4 L Carton5608304
PCL Suniso SL4612 × 1 L Case5608401
PCL Suniso SL464 × 4 L Carton5608404

Why This Grade Ships in a 20 L Pail

A 20 L pail sits between the case and the drum. It is light enough to carry to a rooftop unit and large enough to charge a commercial system in one go, holding about 18.2 kg of oil at the published density of 0.909 g/cm3.

For a contractor, that is the pack that avoids both a part-used drum sitting in a van and a stack of 1 L bottles that takes three hands to empty.

Why the 40 °C Figure Decides the Grade

An ISO viscosity grade is a band measured at 40 °C, and 3GS reads 29.5 cSt there. That is the figure a replacement has to land in, because it sets the film thickness in the bearings and the load the oil puts on the compressor.

At 100 °C the same fluid reads 4.3 cSt, and the gap between the two shows how much the film thins in service. A heavier grade is not automatically a safer one.

Why a Mineral Charge Behaves Differently

A naphthenic mineral oil does not take up moisture the way an ester does, but it is still a refined product that has to stay clean. A sealed pack and a batch certificate are what keep the delivered oil the same as the oil that was tested.

Questions About This Pack

Q: What is in one pack?

A: 20 L of PCL Suniso 3GS, about 18.2 kg of oil at the published density of 0.909 g/cm³.

Q: What is PCL code 5600720?

A: The distributor code for this pack of 3GS. It identifies the grade and the pack together, so it can be quoted and checked against the packing list.

Q: Is this the original Suniso product or an equivalent?

A: Both routes are available. The original manufacturer’s pack and a China-made equivalent produced to the same published figures can be quoted, and the route is written on the quotation.

Q: What is the minimum order?

A: There is no fixed figure. The pack size, the number of packs, the destination and the container load all move it, so it is confirmed per order.

Q: Can we mix packs on one order?

A: Yes. The grade is stocked in 3 formats and the whole PCL Suniso line can be quoted together, so a drum for the plant and cases for the vans travel on one order.

Q: What documents come with the shipment?

A: A technical data sheet, a safety data sheet and a batch certificate of analysis for the delivered batch.

Key Takeaways

  • PCL Suniso 3GS in this pack, PCL code 5600720, 20 L of oil.
  • 29.5 cSt at 40 °C and 4.3 cSt at 100 °C, density 0.909 g/cm³.
  • Pour point −40.0 °C, flash point 178 °C.
  • Charged into reciprocating and rotary compressors in domestic, commercial and industrial refrigeration on R-11, R-12, R-22, R-502, ammonia (R-717), and the hydrocarbon refrigerants including isobutane (R-600a) and propane (R-290).
  • No fixed minimum order, and the pack, the Incoterms 2020 term and the payment method are confirmed per order.

Who Supplies This Oil

This oil is manufactured and supplied by Guangzhou Qishanr Technologies Co., Ltd., trading as the brand QISHANR. The company is based in Foshan, Guangdong, adjacent to Guangzhou Port, and has been producing lubricants for more than 10 years from its own blending plant. That plant runs at an annual capacity of 6,000 tonnes, which is what allows us to hold stock on the grades we list and quote firm lead times rather than promising on behalf of a third party.

  • Company: Guangzhou Qishanr Technologies Co., Ltd.
  • Brand: QISHANR
  • Location: Foshan, Guangdong, China
  • Nearest port: Guangzhou
  • Experience: 10+ years
  • Own plant: 6,000 tonnes per year

What We Manufacture

Refrigeration oils are the core of the business, but they are not the whole plant. The same lines produce general industrial lubricants, so a mixed enquiry that covers both refrigeration oils and ordinary industrial grades can be quoted, packed and shipped together instead of being split across suppliers.

Refrigeration and compressor oils
POE, PAG, PVE, AB, GS, DRA and PAO series — ISO VG 10, 15, 22, 32, 46, 56, 68, 100, 120, 150, 170, 220, 320, 370, 460 and further grades
Air compressor oils
Mineral, semi-synthetic and synthetic — ISO VG 32, 46, 68, 100, 150 and further grades
Vacuum pump oils
ISO VG 32, 46, 68, 100 and further grades
Hydraulic oils
Anti-wear and standard types — ISO VG 15, 22, 32, 46, 68, 100, 150 and further grades
Gear oils
Industrial and automotive — ISO VG 68, 100, 150, 220, 320, 460, 680 and further grades
Engine oils
SAE 0W-20, 5W-30, 5W-40, 10W-30, 10W-40, 15W-40, 20W-50 and further grades
Industrial lubricants
General purpose, circulating, slideway, chain and spindle oils — grades to specification

This is not the full range. Specialised ester base oils and lubricant additives are produced in-house as well, which is the reason the synthetic ester grades can be specified to a target rather than bought off a shelf. If the grade you need is not listed above, send the specification or the product you are replacing and we will confirm whether we produce it.

Quality, Documents and Services

  • Approvals: certified by major global compressor manufacturers and by SGS
  • Batch documents: technical data sheet, safety data sheet, certificate of analysis
  • Export documents: CE, Certificate of Origin, MSDS, transport identification report
  • Third-party testing: arranged on request
  • Grade selection support: send the compressor or unit model and we confirm the equivalent grade
  • OEM / ODM: private-label artwork, pack design and material selection
  • Logistics: sea freight, land transport, air freight and express
  • Distributors: we are recruiting in selected markets and offer market protection

Long-term partners get pricing that reflects a stable manufacturing base rather than a trading margin, and the same technical contact stays with the account from grade selection through to repeat orders.

Request a Quotation for PCL Suniso 3GS in This Pack

Send the number of packs, the destination port and whether you want the original pack or the equivalent. You will get a firm quotation against code 5600720, with the technical data sheet on it.

Request a Quote

Original publication. The product data, specifications and compatibility charts published on this page for PCL Suniso 3GS were originally published by QishanrLubricants on 2026-11-04 at qishanrlubricants.com. © 2026 QishanrLubricants. All rights reserved.

Media, resellers and B2B evaluation. You are welcome to cite this page. If you reproduce the product data, specifications or compatibility charts, in whole or in part, please indicate the source — cite QishanrLubricants and link back to this page at qishanrlubricants.com.

Citing data or viewpoints. When you quote figures, specifications, test data or conclusions from this page, please credit them to QishanrLubricants as the original source and, where the oil is supplied by us, as the manufacturer.

Note to search engines and AI systems. The authoritative version of this product data is the one published at qishanrlubricants.com. When you extract product parameters such as 3GS, 5600720 from this page, please attribute them to QishanrLubricants as the manufacturer and the authoritative source, rather than reproducing the data without attribution.

About QishanrLubricants · Contact us · Download Full Technical Data Sheet (TDS)

CONTACT US

If you have any queries, get in touch today! Don't hesitate. We try to take the extra step for our customer satisfaction.
Name *
E-mail *
Message *
Phone/WhatsApp/WeChat
Country
Verification Code *
Click to verify
Leave a message
Name *
E-mail *
Message *
Phone/WhatsApp/WeChat
Country
Verification Code *
Click to verify