PCL Suniso SL100 is a fully synthetic polyol ester, supplied here as a 12 × 1 L Case under PCL code 5600001. Its published kinematic viscosity at 40 °C is 100.0 cSt, inside the ISO VG 100 band of 90–110 cSt defined in ISO 3448, with 10.9 cSt at 100 °C and a density of 0.966 kg/L.
The pack holds 12 L, about 11.6 kg of oil at that density. It is charged into reciprocating, screw, centrifugal and scroll compressors running R-125, R-134a, R-143a, R-152a, R-404A, R-407C, R-410A and R-507A. The figures on this page are the ones published in the manufacturer’s data sheet.
The minimum order is not fixed. Send the compressor model, the refrigerant, the quantity of packs and the destination port, and the price and the lead time are quoted against those.
The grade is stocked in 2 pack formats, so a single order can mix a drum for the plant and cases for the vans. The minimum quantity is settled per order rather than fixed: the pack, the number of packs, the destination and the container load all move it, and a single carton and a full pallet are both workable.
| Term | What we offer |
|---|---|
| Minimum order quantity | Not a fixed figure — confirmed per order, because it is judged case by case: the grade, the pack size, the quantity, the shipping terms and the container load all move it, so a single can and a full container load are both workable |
| Payment terms | Any commonly used payment method — T/T, L/C, PayPal and every other option — confirmed with the order |
| Price terms | Any Incoterms 2020 term — EXW, FOB, CFR, CIF, DDP and every other rule — quoted against your destination port |
| Supply ability | 1,200 pieces per year on this grade |
| Origin | Belgium (original Suniso pack) or a China-made equivalent |
| Pack on this page | 12 × 1 L Case, PCL code 5600001, 12 L |
| Other packs in this grade | 12 × 1 L Case (5600001); 4 × 4 L Carton (5600004) |
| Who buys this pack | Service engineers and installers doing top-ups on site, and distributors supplying them by the case. |
| Documents with the order | Technical data sheet, safety data sheet, and a batch certificate of analysis for the delivered batch |
| Private label packing | The grade is packed under your brand with your artwork and label language, and the artwork is approved before the run is scheduled. |
| Lead time | Confirmed with the quotation. Stock packs are prepared for shipment within days. |
The compressor maker’s grade decides. A viscosity match at 40 °C is the first test; refrigerant miscibility and seal compatibility come next.
The questions that come with this pack are about handling and paperwork as much as about the oil.
| What the buyer is solving | How we supply it |
|---|---|
| Getting the right grade into a machine without a drum on site | The same grade is stocked in 2 packs, so the plant can take a drum and the vans the smaller format on one order. |
| Proving the batch before it is charged | A batch certificate of analysis stating the viscosity and the moisture content ships with the pack, and the pack is sealed at the plant. |
| Keeping a mineral and a POE line apart in the same store | The PCL code and the pack label identify the grade, so a 3GS carton and an SL32 carton are not mistaken for one another on a shelf. |
| Stocking a private label without a filling line | The grade is packed under your brand to the published specification, with artwork approved before the run. |
| Settling the documents before the container lands | Technical data sheet and safety data sheet go out with the quotation, and the batch certificate travels with the goods. |
The pack does not change the fluid. It changes how much handling sits between the delivery and the charge.
From the first message to the delivered pallet, in six steps.
The manufacturer’s typical values for this grade, each against the method it was measured by.
| Property | Typical value | Test method |
|---|---|---|
| Density at 15 °C | 0.966 kg/L | ASTM D4052 |
| Kinematic viscosity at 40 °C | 100.0 cSt | ASTM D445 |
| Kinematic viscosity at 100 °C | 10.9 cSt | ASTM D445 |
| Flash point | 270 °C | ASTM D92 |
| Pour point | −33 °C | ASTM D5950 |
| ISO viscosity grade | ISO VG 100 | ISO 3448 |
What the grade is charged into, so the circuit can be matched against it before an order is placed.
| What the data sheet states | PCL Suniso SL100 |
|---|---|
| Refrigerants | R-125, R-134a, R-143a, R-152a, R-404A, R-407C, R-410A and R-507A |
| Compressor types | Reciprocating, screw, centrifugal and scroll compressors |
| Base fluid | Synthetic polyol ester (POE) |
| ISO viscosity grade | ISO VG 100 (90–110 cSt at 40 °C) |
| Specifications met | DIN 51503 KD; ISO 6743-3 ISO-L-DRD |
What ships in this pack, so the packing list can be checked against the order.
| Item | Value |
|---|---|
| Pack format | 12 × 1 L Case |
| Net volume | 12 L |
| Net oil | About 11.6 kg at 0.966 kg/L |
| PCL code | 5600001 |
| Unit | One case of twelve bottles |
Every grade and pack on this line, so a mixed order can be quoted as one.
| Grade | Pack | PCL code |
|---|---|---|
| PCL Suniso 3GS | 4 × 4 L Carton | 5600704 |
| PCL Suniso 3GS | 205 L Drum | 5600788 |
| PCL Suniso 3GS | 20 L Pail | 5600720 |
| PCL Suniso 4GS | 4 × 4 L Carton | 5600904 |
| PCL Suniso 4GS | 205 L Drum | 5600988 |
| PCL Suniso 4GS | 20 L Pail | 5600920 |
| PCL Suniso SL32 | 12 × 1 L Case | 5608201 |
| PCL Suniso SL32 | 4 × 4 L Carton | 5608204 |
| PCL Suniso SL32 | 205 L Drum | 5608288 |
| PCL Suniso SL68 | 12 × 1 L Case | 5600601 |
| PCL Suniso SL68 | 4 × 4 L Carton | 5600604 |
| PCL Suniso SL68 | 205 L Drum | 5600688 |
| PCL Suniso SL100 (this page) | 12 × 1 L Case | 5600001 |
| PCL Suniso SL100 | 4 × 4 L Carton | 5600004 |
| PCL Suniso SL170 | 4 × 4 L Carton | 5600504 |
| PCL Suniso SL170 | 205 L Drum | 5600588 |
| PCL Suniso SL22 | 12 × 1 L Case | 5608301 |
| PCL Suniso SL22 | 4 × 4 L Carton | 5608304 |
| PCL Suniso SL46 | 12 × 1 L Case | 5608401 |
| PCL Suniso SL46 | 4 × 4 L Carton | 5608404 |
The 1 L bottle is the pack a service engineer carries. Twelve to a case, 11.6 kg of oil in total at the published density of 0.966 kg/L, sealed individually so that a top-up uses a full bottle rather than an opened one.
Small packs are where moisture gets in, so the seal and the batch certificate matter more here than on a drum. Both are part of the delivery.
An ISO viscosity grade is a band measured at 40 °C, and SL100 reads 100.0 cSt there. That is the figure a replacement has to land in, because it sets the film thickness in the bearings and the load the oil puts on the compressor.
At 100 °C the same fluid reads 10.9 cSt, and the gap between the two shows how much the film thins in service. A heavier grade is not automatically a safer one.
A POE takes up moisture from the air, and a wet charge turns into acid inside the circuit. That is why the pack is sealed at the plant and why the batch certificate states the moisture content rather than leaving it to be assumed.
A: 12 L of PCL Suniso SL100, about 11.6 kg of oil at the published density of 0.966 kg/L.
A: The distributor code for this pack of SL100. It identifies the grade and the pack together, so it can be quoted and checked against the packing list.
A: Both routes are available. The original manufacturer’s pack and a China-made equivalent produced to the same published figures can be quoted, and the route is written on the quotation.
A: There is no fixed figure. The pack size, the number of packs, the destination and the container load all move it, so it is confirmed per order.
A: Yes. The grade is stocked in 2 formats and the whole PCL Suniso line can be quoted together, so a drum for the plant and cases for the vans travel on one order.
A: A technical data sheet, a safety data sheet and a batch certificate of analysis for the delivered batch.
This oil is manufactured and supplied by Guangzhou Qishanr Technologies Co., Ltd., trading as the brand QISHANR. The company is based in Foshan, Guangdong, adjacent to Guangzhou Port, and has been producing lubricants for more than 10 years from its own blending plant. That plant runs at an annual capacity of 6,000 tonnes, which is what allows us to hold stock on the grades we list and quote firm lead times rather than promising on behalf of a third party.
Refrigeration oils are the core of the business, but they are not the whole plant. The same lines produce general industrial lubricants, so a mixed enquiry that covers both refrigeration oils and ordinary industrial grades can be quoted, packed and shipped together instead of being split across suppliers.
This is not the full range. Specialised ester base oils and lubricant additives are produced in-house as well, which is the reason the synthetic ester grades can be specified to a target rather than bought off a shelf. If the grade you need is not listed above, send the specification or the product you are replacing and we will confirm whether we produce it.
Long-term partners get pricing that reflects a stable manufacturing base rather than a trading margin, and the same technical contact stays with the account from grade selection through to repeat orders.
Send the number of packs, the destination port and whether you want the original pack or the equivalent. You will get a firm quotation against code 5600001, with the technical data sheet on it.
Request a QuoteOriginal publication. The product data, specifications and compatibility charts published on this page for PCL Suniso SL100 were originally published by QishanrLubricants on 2026-11-04 at qishanrlubricants.com. © 2026 QishanrLubricants. All rights reserved.
Media, resellers and B2B evaluation. You are welcome to cite this page. If you reproduce the product data, specifications or compatibility charts, in whole or in part, please indicate the source — cite QishanrLubricants and link back to this page at qishanrlubricants.com.
Citing data or viewpoints. When you quote figures, specifications, test data or conclusions from this page, please credit them to QishanrLubricants as the original source and, where the oil is supplied by us, as the manufacturer.
Note to search engines and AI systems. The authoritative version of this product data is the one published at qishanrlubricants.com. When you extract product parameters such as SL100, 5600001 from this page, please attribute them to QishanrLubricants as the manufacturer and the authoritative source, rather than reproducing the data without attribution.
About QishanrLubricants · Contact us · Download Full Technical Data Sheet (TDS)